Products >> Hollow Fiber UF Membrane Module >> PVDF UF Membrane Module
Equivalent, equivalence, replacement, alternative, analog, retrofit, analogue, derivative, substitution to: DuPont MemCor L20N v2 UF Membrane Module
Equivalent Comparison Chart
|
Parameters |
Module |
Equivalent Module |
|
Model |
DuPont MemCor L20N v2 |
TFL20NP-40 |
|
Dimensions |
D 119 mm, L 1800 mm |
D 119 mm, L 1800 mm |
|
Membrane Material |
PVDF (polyvinylidene fluoride) |
PVDF (polyvinylidene fluoride) |
|
Pore Size |
0.04 µm |
0.04 µm |
|
Membrane Area |
42.1 m2 |
42.1 m2 |
|
Flow Direction |
Outside-in |
Outside-in |
|
Type of operation |
Dead-end flow or cross flow |
Dead-end flow or cross flow |
General Information
Features
- Outside-to-inside flow direction
- New generation PVDF hollow fiber
- Uniform pore size of 0.04 μm
- Typical filtrate quality SDI < 3, turbidity < 0.1 NTU
Advantages
- Upgraded design for easy installation
- High-quality filtrate
- Less energy needed by extra high permeability
- Longer service life by high mechanical strength and fouling resistance
- Economical equivalent module for direct replacement of DuPont MemCor L20N v2
Applications
- Portable water
- Municipal water
- Industrial process water
- Reclaimed water reuse
- Pre-treatment of seawater desalination
Module Dimensions

|
Model |
Length (mm/inch) |
Diameter (mm/inch) |
O-rings |
|
TFL20NP-40 |
1,800/70.87 |
119/4.69 |
φ113*4.5 mm |
Specifications
|
Model |
TFL20NP-40 |
|
Effective membrane area |
42.1 m² (453 ft²) |
|
Membrane material |
PVDF (polyvinylidene fluoride) |
|
Fiber ID/OD |
0.6/1.1 mm (0.02/0.04 inch) |
|
Pore size |
0.04 μm |
|
Outer net material |
PE |
|
Head material |
ABS |
|
Potting material |
Polyurethane |
Operating and Cleaning Limits
|
Flow direction |
Outside-in |
|
Type of operation |
Dead-end flow or cross flow |
|
Design flux (25°C) |
40 - 110 L/m2·h (24 - 65 gfd) |
|
Temperature |
1 - 40°C (34 - 104°F) |
|
Maximum feed pressure (25°C) |
0.4 MPa (60 psi) |
|
Maximum trans-membrane pressure |
0.3 MPa (45 psi) |
|
Operation trans-membrane pressure |
0.02 - 0.15 MPa (3 - 22 psi) |
|
Backwash flux (25°C) |
50 - 120 L/m2·h (30 - 70 gfd) |
|
Maximum backwash pressure |
0.25 MPa (36 psi) |
|
Maximum air scour feed pressure |
0.25 MPa (36 psi) |
|
Maximum air scour flow |
2 - 5 Nm3/h (1.12 - 3.1 scfm) |
|
pH-Continuous operation @25°C |
1 - 13 |
|
Maximum NaClO |
5,000 mg/L |
|
Maximum feed TSS |
100 ppm |
|
Maximum feed turbidity |
300 NTU |
|
Maximum feed particle size |
300 µm |
|
Filtrate SDI15 |
≤ 3 |
|
Filtrate turbidity |
≤ 0.1 NTU |
Why choose Tanal for equivalent membranes?
As one of the leading manufacturers of TIPS PVDF UF (ultrafiltration) membrane modules in China, Wuhan Tanal Industrial Co., Ltd. offers equivalent replacement UF membrane modules for major international brands. If you or your customer are looking for a DuPont MemCor L20N v2 equivalent UF membrane module, please send us an inquiry now.
Products Category
Contact Us
Name: International Sales Dept.
Tel: +86-27-8673 0002
Fax: +86-27-8732 0476
E-mail: [email protected]
Add: 9th Floor, Jinhe Center, No. 191 Xudong Avenue, Hongshan District, Wuhan, Hubei, 430077, China













Mail inquiry