Products >> Hollow Fiber UF Membrane Module >> PES UF Membrane Module

ZW700B-10060/UF8/7B/S/0.9/60 Equivalent

Product No.：TF7B0.9D-60WRL
Online Inquiry

Equivalent, equivalence, replacement, alternative, alternate, analog, retrofit, analogue, derivative, substitution: Suez GE ZeeWeed 700B SevenBore ZW700B-10060/UF8/7B/S/0.9/60, ZW700B10060/UF8/7B/S/0.9/60 UF membrane module

General Information

TF7B0.9D-60WRL is manufactured as the quivalent, replacement, alternative, retrofit and analogue to Suez GE ZeeWeed 700B SevenBore ZW700B-10060/UF8/7B/S/0.9/60, which are used for production of process water, potable water and wastewater. Major applications are the filtration of surface water, potable water, industrial wastewater and municipal sewage. TF7B0.9D-60WRL ultrafiltration modules use Tanal’s SevBore fiber technology with an inside-out flow direction. SevBore fibers are naturally hydrophilic 7-bore PES hollow fibers by advanced ultrafiltration technology, which makes TF7B0.9D-60WRL ultrafiltration membrane modules the most robust PES (polyether sulfone) UF membrane on the market.

The mode of operation is either dead-end or cross-flow (though cross flow mode is only used in certain circumstances), backwash (with filtrate only) at regular intervals and chemically enhanced backwash are required for the continuous operation.

Features

A nominal pore size of 0.02 μm for optimal removal of particles, bacteria and viruses
Inside-out flow direction without air scouring
PES membrane fibers of 7 bores
Typical filtrate quality SDI < 3, turbidity < 0.1 NTU

Advantages

Extremely high mechanical strength with no fiber breakage
High chemical tolerance
High-quality filtrate by reliable blocking of microorganisms and viruses
Minimum operating costs and efficient backwash
Economical equivalent module for direct replacement of Suez GE ZeeWeed 700B ZW700B-10060/UF8/7B/S/0.9/60 for plug-and-play

Applications

Portable water
Municipal water
Industrial process water
Reclaimed water reuse
Pre-treatment of seawater desalination

Module Dimensions

Model	Overall length L (mm/inch)	Length feed connectors L1 (mm/inch)	Length without end caps L2 (mm/inch)	Length top feed to filtrate connector L3 (mm/inch)	Diameter without end caps D (mm/inch)	End cap clamp diameter D1 (mm/inch)	Connector length W (mm/inch)	Feed, Filtrate connector (d)
TF7B0.9D-60WRL	1,687/66.41	1,599/62.95	1,485/58.46	191/7.52	250/10	295/11.61	55/2.17	2”

Specifications

Model	TF7B0.9D-60WRL
Effective membrane area	60 m²/645.9 ft²
Fiber ID/OD	0.9/4.0 mm (0.04/0.16 inch)
Membrane material	Modified PES (polyethersulfone), 7 bores
Pore size	0.02 μm
Housing material	UPVC
End cap material	UPVC
Clamp material	Stainless Steel
Sealing material	EPDM
Potting material	Epoxy resin
Feed/filtrate connector	DN50 (2 inch Victaulic)
Weight	55 kg/120 lb

Operating and Cleaning Limits

Flow direction	Inside-out
Type of operation	Dead-end flow or cross flow
Temperature range	1-40℃ (34-104°F)
Max. rate of temperature change (per minute)	5℃ (9°F)
Max. feed pressure	0.5 MPa (72.5 psi)
Max. rate of pressure change (per second)	0.05 MPa (7.25 psi)
Max. trans-membrane pressure	0.15 MPa (21.75 psi)
Max. backwash pressure	0.3 MPa (43.5 psi)
Filtration flux	60-180 L/m2·h (35-105 gfd)
Max. backwash/forward flush	230-300 L/m2·h (135-175 gfd)
pH-continuous operation @ 25℃	2 - 11
pH-CIP @ 25℃	1 - 13
Hypochlorite (NaOCl) for cleaning	50 to 200 ppm
Hydrogen peroxide for cleaning	100 to 500 ppm

We offer various UF membrane module equivalents. If you and your customer accept Suez GE ZeeWeed 700B ZW700B-10060/UF8/7B/S/0.9/60 equivalent ultrafiltration membrane module, please send us an inquiry now.

Previous Product：XF55 Equivalent Next Product：W20-08N-RAS111 Equivalent